You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Products

Cheminert Flooring

Epoxy flooring systems for superior protection against chemical exposure in industrial environments.

Cheminert provides a variety of epoxy flooring options for superior protection against chemical exposure in industrial environments. The flooring systems use a specially-formulated epoxy resin incorporating chemical-resistant aggregates for added protection not found in conventional epoxy systems.

Offering high flexibility, Cheminert comes in a variety of flooring options to suit your environment and project requirements, including conductive flooring, high-density applications, and self-leveling systems. We also provide Cheminert decorative flooring using mosaic terrazzo and quartz to create attractive, designed finishes. Cheminert can be applied over concrete and other substrates depending on the system.

Advantages

  • Resistant to a wide range of acids, bases, solvents, oils, and food fats
  • Monolithic, seamless
  • Available with protective biocide
  • Available in a wide range of colors
  • Can be topped with optional sealers or pigmented finishes
  • Skid-resistance profile options
  • Installed only by professional, factory-trained Dex-O-Tex contractors

Please see product safety data sheets.

Resources

Cheminert Flooring System Options

Cheminert K

Trowel-applied flooring for general industrial use

  • Trowel-applied system
  • Can incorporate integral cove base
  • Low temperature stability; withstands typical commercial freezer conditions (up to -10°F)
  • Rapid installation (in service within 24 hours in cases where preparation work is minimal)
  • Application thickness of 3/16” (4.7 mm) to 1/4” (6.3 mm)
  • Can be installed over concrete, metal, or ceramic surfaces

Cheminert K – High Impact

Industrial flooring for high-impact areas

  • Superior compressive strength and impact resistance
  • Can incorporate a high-impact cove base
  • Low temperature stability; withstands typical commercial freezer conditions (up to -10°F)
  • Rapid installation (in service within 24 hours in cases where preparation work is minimal)
  • Application thickness of 3/16” (4.7 mm) to 1/4” (6.3 mm)
  • Can be installed over concrete or metal

Cheminert K – Conductive

Conductive, non-sparking flooring for hazardous areas

  • Electrically conductive and non-sparking
  • Factory pre-engineered and pre-packaged system
  • Pre-tested for conductivity
  • Trowel-applied system
  • Can incorporate integral cove base
  • Application thickness of 3/16” (4.75mm) to 1/4” (6.35mm)
  • Available only in black

Cheminert HD

High-density, fluid-applied flooring for industrial use

  • High-density, fluid-applied slurry
  • Can incorporate integral cove base
  • Rapid installation (in service within 24 hours in cases where preparation work is minimal)
  • Application thickness of 1/8” (3.17mm) to 3/16” (4.76mm) (can be installed in multilifts when increased thickness is desired)
  • Can be installed over concrete, metal, or ceramic surfaces

Cheminert L

Self-leveling flooring for moderate-wear areas

  • Self-leveling system
  • Fluid-applied in several successive coats to achieve desired finish
  • Provides a skid-resistant surface
  • Rapid installation
  • Application thickness of 62 mils (1/16”; 1.58 mm) – 125 mils (1/8”; 3.16mm)
  • Can be installed over a wide range of new and existing surfaces

Epoxy sealer providing a clear orange peel finish



Des questions? Contactez-nous

Newsletter

Inscrivez-vous à notre newsletter et suivez-nous sur les réseaux sociaux